What preparations should be done before installing the motor soft starter
What preparations should be done before installing the motor soft starter
Avoid installing the soft starter in direct sunlight.
Avoid installing in dusty and metal powder places.
Note: It is strictly forbidden to install in places with corrosive and explosive gas.
(Temperature and humidity should also be noted.)
Second, check whether the design of the electrical drive system is correct and whether the motor drive torque is sufficient.
Third, whether the grid capacity is sufficient to meet the soft start conditions.
Fourth, whether the soft starter and other electrical equipment are properly matched and can work normally. (Need to pay attention, such as contactors, transformers, circuit breakers and other accessories, whether the capacity matches the soft starter)
Fifth, to demonstrate the feasibility of the motor step-down soft start.
6. Supplement: The soft starter should be installed indoors in a well-ventilated place, and there should be enough space around the installation to facilitate the cooling effect of the motor soft starter and facilitate maintenance.